Attachments:

bus-ele-cat-1007-flc-2018.pdf

[Eaton Bussmann series Full line catalog]

0 kB

Eaton Bussmann Series Full Line Catalog: A Complete Guide to Electrical Circuit Protection

Introduction to the Eaton Bussmann Series Full Line Catalog

Reliable electrical circuit protection is essential for industrial facilities, commercial buildings, electrical distribution systems, and electronic equipment. Choosing the right fuse and protection components helps safeguard electrical installations against overcurrent conditions, short circuits, and potential equipment damage.

The Eaton Bussmann Series Full Line Catalog 1007 is a comprehensive product reference designed to help electrical engineers, panel builders, maintenance professionals, distributors, and procurement specialists identify suitable circuit protection products for their applications.

Published in October 2018, the catalog brings together a broad range of Bussmann series fuses, fuse holders, fuse blocks, disconnect switches, surge protective devices, and power distribution components. It provides product descriptions, electrical ratings, catalog numbers, dimensions, and selection information to support product identification and specification.

Whether you are designing an industrial control panel, maintaining an electrical distribution system, or sourcing replacement fuses, the Eaton Bussmann full line catalog provides a valuable starting point for understanding the available product range.

What Is the Eaton Bussmann Series Full Line Catalog?

The Eaton Bussmann Series Full Line Catalog is a technical reference covering a wide selection of electrical circuit protection and power distribution products.

It is intended to simplify the process of finding products that meet specific electrical requirements. Instead of consulting multiple individual product documents at the beginning of a selection process, users can explore product families and compare key specifications within one catalog.

The catalog includes information relevant to:

• Industrial electrical installations

• Commercial electrical distribution

• Control panels and automation systems

• Electronic and printed circuit board protection

• Renewable energy applications, including photovoltaic systems

• Power conversion and semiconductor protection

• Medium-voltage electrical equipment

• Fuse holders, disconnect switches, and power distribution assemblies

By bringing these product categories together, the catalog supports more efficient product research, component selection, and electrical system planning.

Key Product Categories in the Bussmann Series Catalog

1. Low-Voltage Branch Circuit Fuses

Low-voltage branch circuit fuses are used to protect electrical circuits and connected equipment from excessive current. The Bussmann series range includes multiple fuse classes and product families designed for different circuit characteristics and installation requirements.

The catalog covers products such as Class CC, Class J, Class L, Class RK1, Class RK5, and other branch circuit fuse types.

Each fuse class has specific characteristics, ratings, and application considerations. Selecting the appropriate product requires evaluating the circuit voltage, operating current, available fault current, required interrupting rating, and applicable electrical standards.

These products are relevant to industrial machinery, distribution panels, motor circuits, and other installations that require dependable overcurrent protection.

2. Low-Voltage Supplemental Fuses and Limiters

The catalog also covers supplemental fuses and current-limiting products for applications requiring additional protection.

These components are commonly considered for control circuits, specialized electrical equipment, and selected power applications. Depending on the product family, available options may differ in voltage rating, current rating, time-delay characteristics, and physical dimensions.

The catalog helps users identify suitable product families and compare their technical specifications before consulting the corresponding product data sheets.

3. Electronic, PCB, and Small-Dimension Fuses

Electronic equipment often requires compact circuit protection components that fit within limited installation spaces.

The Bussmann series catalog includes small-dimension fuses designed for electronic circuits, printed circuit boards, and other compact electrical assemblies. Product families cover different physical sizes and operating characteristics, including fast-acting and time-delay options.

These fuses can be relevant to power supplies, electronic control equipment, instrumentation, and other applications where component dimensions and response characteristics are important.

When selecting an electronic fuse, engineers should consider normal operating current, startup or inrush current, voltage rating, breaking capacity, ambient temperature, and the manufacturer's recommended operating conditions.

4. High-Speed Fuses

High-speed fuses are designed for applications that require rapid protection of sensitive power electronics and semiconductor devices.

The catalog covers Bussmann series high-speed fuse families used in applications such as power converters, rectifiers, DC drives, and other power conversion equipment.

Depending on the product, the available specifications may include AC and DC voltage ratings, current ratings, interrupting capabilities, physical dimensions, and operating characteristics.

Choosing the correct high-speed fuse requires more than matching the nominal current. Engineers should evaluate the semiconductor's withstand characteristics, prospective fault current, system voltage, and the fuse's energy-limiting performance.

5. IEC and British Standard Fuses

Electrical installations designed around IEC and British Standard requirements may require specific fuse dimensions, utilization categories, and electrical ratings.

The Bussmann series catalog includes fuse products intended for these applications, with technical information supporting product comparison and identification.

The range includes industrial cylindrical fuses and other fuse families available in different sizes and current ratings.

For international projects, it is particularly important to verify that the selected fuse meets the applicable installation requirements and is compatible with the relevant fuse holder or fuse base.

6. Photovoltaic Fuses, Holders, and Blocks

Photovoltaic installations require circuit protection components suited to the operating characteristics of solar power systems.

The catalog includes photovoltaic fuse products, holders, and blocks intended for relevant solar electrical applications.

When selecting photovoltaic protection, important considerations include maximum system voltage, operating current, fault-current conditions, fuse utilization requirements, environmental conditions, and compatibility with the installed equipment.

Correct component selection helps support the protection of photovoltaic circuits and associated electrical equipment. The precise suitability of a fuse must always be confirmed against the system design and applicable standards.

7. Medium-Voltage Fuses

Medium-voltage electrical systems require protection solutions selected according to system voltage, equipment characteristics, and fault conditions.

The Bussmann series catalog includes several medium-voltage fuse categories, including E-Rated, R-Rated, and PT fuse products, alongside other specialized fuse types and accessories.

These products serve different protection requirements and are not interchangeable solely because their current ratings appear similar.

Engineers should verify the intended application, voltage rating, fuse characteristics, mounting arrangement, and coordination requirements before specifying a medium-voltage fuse.

8. Fuse Blocks and Holders

Fuse holders and fuse blocks provide the mechanical and electrical interface between a fuse and the circuit in which it is installed.

The catalog describes a variety of mounting arrangements and product configurations, including DIN-rail and panel-mounted options for applicable product families.

Important selection factors include:

• Compatibility with the selected fuse class and dimensions

• Rated system voltage and current

• Available fault-current and short-circuit ratings

• Number of poles

• Mounting and wiring requirements

• Finger-safe construction and other relevant safety features

• Environmental and installation conditions

Selecting a compatible holder or block is essential for achieving the intended performance of the complete circuit protection assembly.

9. Power Distribution and Terminal Blocks

Power distribution and terminal blocks support the organized distribution and termination of electrical conductors in panels and equipment.

The catalog provides information on product families used in electrical distribution assemblies and control panels.

When specifying these components, users should review conductor compatibility, terminal capacity, rated current and voltage, mounting arrangements, and any applicable short-circuit or installation requirements.

A suitable power distribution layout can also simplify wiring, maintenance, and future modifications.

10. Connector Products and Disconnect Switches

The Bussmann series catalog extends beyond individual fuses to include connector products and disconnect switches.

These product categories support electrical system assembly, circuit isolation, and power distribution. The available configurations and ratings vary by product family.

When evaluating disconnect switches, it is important to distinguish between isolation requirements and switching or load-breaking capabilities. The selected device must be rated for the intended operating conditions and installed according to the manufacturer's instructions.

11. Quik-Spec Electrical Gear

The catalog also covers Quik-Spec electrical gear, a product category intended for specified electrical distribution and circuit protection applications.

These solutions may be relevant to engineers and panel builders looking for coordinated equipment rather than selecting every component independently.

Product suitability depends on the intended installation, system ratings, required protection characteristics, and compatibility with the complete electrical assembly.

12. Surge Protective Devices

Surge protective devices help protect electrical systems and connected equipment against transient overvoltages.

The Bussmann series catalog includes surge protection products within its broader electrical protection portfolio.

Selecting an appropriate surge protective device involves assessing the electrical system configuration, expected surge exposure, required protection level, installation location, and applicable standards.

Surge protection should be considered as part of a coordinated electrical protection strategy rather than as a replacement for overcurrent protection.

How to Use the Eaton Bussmann Full Line Catalog

The catalog is most useful when approached as a structured product selection reference.

Step 1: Identify the Application

Begin by defining the equipment or circuit requiring protection. This might be an industrial control panel, electronic power supply, photovoltaic installation, motor circuit, or medium-voltage assembly.

The application determines which product categories and technical requirements are relevant.

Step 2: Determine the Electrical Requirements

Establish the system voltage, normal operating current, prospective short-circuit current, load characteristics, and any applicable installation standards.

For semiconductor circuits, electronic equipment, and motor applications, additional operating characteristics may influence the selection.

Step 3: Find the Appropriate Product Family

Use the catalog contents and product indexes to identify the relevant section. Compare the available product families and narrow the selection according to the intended application.

Step 4: Compare Ratings and Dimensions

Review the listed current and voltage ratings, interrupting ratings, physical dimensions, utilization categories, and compatibility requirements.

A product should not be selected on the basis of current rating alone. All relevant electrical and mechanical requirements must be satisfied.

Step 5: Verify the Technical Documentation

The full line catalog is dated October 2018. Before purchasing or specifying a product, confirm the current product status, availability, specifications, certifications, and installation requirements using the manufacturer's latest applicable documentation.

This is particularly important for replacement projects, new equipment designs, and installations subject to regulatory requirements.

Step 6: Confirm the Complete Protection Design

The final selection should account for protective-device coordination, conductor protection, equipment withstand ratings, and the installation's operating conditions.

Qualified electrical professionals should verify the complete design before implementation.

Benefits of Using the Bussmann Series Full Line Catalog

Comprehensive Product Reference

The catalog combines multiple product categories in one technical reference, helping users explore options across low-voltage, electronic, high-speed, photovoltaic, and medium-voltage protection.

Easier Product Identification

Catalog numbers, product descriptions, ratings, and dimensional information help users narrow their choices and identify components for further evaluation.

Support for Engineering and Panel Design

Electrical engineers and panel builders can use the catalog during preliminary design, component specification, and electrical bill-of-material preparation.

Assistance with Maintenance and Replacement

Maintenance teams can consult product descriptions and technical ratings when identifying replacement components. However, the original fuse's current rating alone is not sufficient to establish that a replacement is suitable.

Better-Informed Procurement

Procurement professionals can use catalog numbers and specifications to communicate component requirements more precisely and reduce ambiguity during sourcing.

Who Should Use the Eaton Bussmann Series Catalog?

The full line catalog is a useful resource for a broad range of electrical professionals.

• Electrical engineers: For circuit protection research, product specification, and design evaluation.

• Panel builders: For identifying fuses, fuse holders, distribution components, and compatible accessories.

• Maintenance technicians: For investigating existing installations and identifying potential replacement products.

• Industrial facilities: For supporting electrical maintenance planning and component identification.

• Electrical distributors: For product identification and technical discussions with customers.

• Procurement specialists: For matching requested catalog numbers with purchasing requirements.

• System integrators: For evaluating protection components used in industrial automation and power conversion systems.

The information is most effective when used alongside application-specific engineering calculations and current manufacturer documentation.

Important Considerations When Selecting Bussmann Fuses

Although the catalog provides extensive technical information, choosing the correct fuse requires careful assessment of the complete electrical system.

Voltage rating: The fuse must be suitable for the circuit's operating voltage and AC or DC characteristics.

Current rating: The selected fuse must accommodate normal operation while providing the intended protection under abnormal conditions.

Interrupting rating: The fuse must be capable of safely interrupting the prospective fault current under the applicable conditions.

Operating characteristics: Fast-acting, time-delay, current-limiting, and high-speed fuses have different characteristics and application requirements.

Physical compatibility: Fuse dimensions, mounting arrangements, holders, and terminal configurations must be compatible.

Standards and approvals: The product must satisfy the requirements applicable to the installation and jurisdiction.

Coordination: The selected fuse should be evaluated in relation to other protective devices and the equipment being protected.

Documentation currency: Since the 2018 catalog is a historical edition, verify current specifications and product availability before relying on it for a new design or purchase.

Frequently Asked Questions

What is the Eaton Bussmann Series Full Line Catalog 1007?

It is a comprehensive product catalog published in October 2018 that covers Bussmann series fuses, fuse holders, fuse blocks, power distribution products, disconnect switches, surge protective devices, and related electrical components.

What types of fuses are included in the catalog?

The catalog covers low-voltage branch circuit fuses, supplemental fuses, electronic and PCB fuses, high-speed fuses, IEC and British Standard fuses, photovoltaic fuses, and medium-voltage fuses.

Can the catalog help identify replacement fuses?

Yes. It provides catalog numbers, product descriptions, ratings, and other technical details that can help identify potential replacements. The replacement must still be verified against the original equipment requirements, current product documentation, and applicable standards.

Does the catalog include fuse holders and fuse blocks?

Yes. It includes a dedicated section covering fuse blocks and holders, with product information for applicable mounting configurations and electrical ratings.

Is the 2018 catalog suitable for new electrical designs?

It can serve as a useful preliminary reference for product families and historical specifications. For new designs, users should verify the latest manufacturer documentation, product availability, applicable standards, and current engineering requirements before finalizing a selection.

How do I choose the correct Bussmann fuse?

Start with the application, system voltage, operating current, prospective fault current, and required protection characteristics. Then check the fuse's ratings, operating characteristics, physical compatibility, and applicable approvals. Final selection should be reviewed by a qualified electrical professional.

Conclusion

The Eaton Bussmann Series Full Line Catalog 1007 is a valuable technical reference for professionals working with electrical circuit protection, industrial power distribution, electronic equipment, and related applications.

Its coverage of low-voltage fuses, high-speed fuses, photovoltaic protection, medium-voltage products, fuse holders, disconnect switches, and power distribution components makes it a useful starting point for product research and specification.

By understanding the available product categories and carefully evaluating electrical ratings, physical compatibility, and application requirements, engineers, maintenance teams, and procurement specialists can make better-informed decisions when identifying circuit protection solutions.

Because this edition was published in October 2018, always confirm critical specifications and product availability against current manufacturer documentation before ordering or installing components.